1. Use a dry wipe to clean the wall area where you will paste.
2. Open the board, place it on the ground, and use heavy objects such as books to press the four corners or all edges of the board, and keep it still for more than 3 hours (one night). --- To eliminate the curling force of the board.
3. Peel off a little bit of the blue tape on the back and paste it on the wall, use a wipe to press the position just pasted to continue peeling the blue tape.
4. After all the pasting is completed, use a dry wipe to press the entire board again. Getting the most out of glue ans let it stand for 2 hours.

ATTENTION:

It should not be pasted on uneven surfaces or walls with unstable surfaces. Use only in smooth clean surface, non-textured, dust-free, dry surfaces.

NO dusty wall, NO concave and convex wall, NO dampness wall, No dusty wall.

INSTALLATIONS TIPS

• We recommend that the YISD® magnetic board be installed over a paint that is more than 6 months old. If you have just repainted your wall, leave some time before applying YISD® (between 4 to 6 months). Some solvents in paints can alter the power of our adhesive.
• To remove your magnetic chalk board from the wall, start from the top and pull very gently downwards. Good to know: The adhesion of the glue generates a minimum of tension that can sometimes cause damage to your wall.
• To clean your YISD® magnetic board, use a smooth cloth or a slightly damp microfiber.

UNLIMITED POSSIBILITIES CREATIVITY